OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-51
[202] CHANGE FEATURE PASSCODE
Uses to change the passcodes for the following features.
No Feature Description
0 RING PLAN The passcode required to place the system in different Ring Plans (RP)
or change the Ring Time Override (RTO).
1 DISA ALARM The passcode required to clear a DISA ALARM generated when the
number of DISA attempts are exceeded.
2 ALARM CLR The passcode required to clear an ALARM generated by the
disconnection of BI-PMS SIO. (Hotel Application only)
5 DELETE This passcode is used to allow items to be deleted from a room bill.
(Hotel Application only)
6 WLAN REGST The passcode required to register a WIP phone.
CONDITIONS
The passcode is four digits long. Each digit can be 0~9.
The current passcode is required for this MMC.
DEFAULT DATA
RING PLAN: 0000
DISA ALARM: 5678
ALARM CLR: 8765
DECT REGST: 4321
DELETE: 9999
WLAN REGST: 0000
ACTION DISPLAY
1) Press Transfer button and enter 202.
Display shows:
CHANGE PASSCODE
RING PLAN:0000
2) Press Volume button to make selection and press Right
Soft button to move cursor to passcode entry.
CHANGE PASSCODE
AA RECORD:4321
3) Enter new passcode via digits from dial keypad.
CHANGE PASSCODE
Press Right Soft button to return to step 2.
Continue to change other passcodes.
To Next Page
Loading...
