Samsung OfficeServ 7000 Series - Hardware Version Display

CHAPTER 2. MMC Programming
2-428
© SAMSUNG Electronics Co., Ltd.
[859] HARDWARE VERSION DISPLAY
This MMC is used for system hardware EPLD/PCB version display.
This is a READ-ONLY MMC.
OfficeServ7400 Main System
No Option Description
1 MP40 CARD Shows the EPLD/PCB version of MCP.
2 Cx M-BOARD Shows the Mother board and EPLD/PCB version cabinet #x.
3 Cx LP CARD Shows the LP and EPLD/PCB version of cabinet #x.
4 Cx LP-y Shows the Daughterboard and EPLD/PCB version.
5 CxSyy Shows the TEPRI card or MGI64 card and EPLD/PCB version.
OfficeServ7200(MCP, MP20) Main System
No Option Description
1 MCP M-BOARD Shows the Mother board and EPLD/PCB version cabinet .
2 MCP CARD Shows the EPLD/PCB version of MCP.
3 MCP B-x Shows the MCP’s Daughterboard #x and EPLD/PCB version
4 CxSy Shows the card and EPLD/PCB version of cabinet #x slot #y.
5 LCP M-BOARD Shows the LCP board
6 LCP CARD Shows the EPLD/PCB version of LCP.
Others
No Option Description
00 M-BOARD Shows the Mother board version of cabinet
01 MP CARD Shows the EPLD/PCB version of MP card
04 MODEM Show the Modem version.
- CxSy Shows the EPLD/PCB version of card in cabinet x/slot y
DEFAULT DATA
NONE