Samsung OfficeServ 7000 Series - Lcr Modify Digit Table

CHAPTER 2. MMC Programming
2-240
© SAMSUNG Electronics Co., Ltd.
[713] LCR MODIFY DIGIT TABLE
This program is sometimes referred to as Outgoing Dial Rules. It enables the system to add
or delete a digit string or singular digit if needed to complete a call. With these digits
inserted, a long distance call will be placed over a local line using the common carrier
network. The characters ‘*’ and ‘#’ can also be entered. There are 200 modify digit entries
available.
Option Description Max. No. of Digit Entries
NOF DEL DGT Number of digits to delete 15
I Insert (before dialing string) 14
A Append (after dialing string) 14
DIGIT STRING KEY
Insert String + Digit String (delete) + Append String
DEFAULT DATA
NONE
ACTION DISPLAY
1)
Press Transfer button and enter 713.
Display shows:
LCR MODIFY (001)
NOF DEL DGT:00
2) Enter index number. (e.g., 005)
OR
LCR MODIFY (005)
NOF DEL DGT:00
Press Volume buttons to make selection and press
Right Soft button to move cursor.
3) Enter number of digits to delete.
OR
LCR MODIFY (005)
NOF DEL DGT:01
Press Right Soft button to skip step and move cursor
to next step.
4) Enter digits to be inserted. (e.g., 10288)
OR
LCR MODIFY (005)
I:10288_
Press Right Soft button to skip step or to store
information and advance to next step.
5) Enter digits to be appended. (e.g., 45678)
OR
LCR MODIFY (005)
A:_
Press Right Soft button to skip step or to store
information and return to step 2.