CHAPTER 2. MMC Programming
2-268
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Option Default Description
15 INCOMING
ANSWER
YES If this option is set to YES, the duration of calls ringing
before being answered will print on SMDR.
16 INTERCOM CALL YES This option determines whether intercom calls will print
on SMDR.
17 KEY MMC IN/OUT YES If set to YES the SMDR record will show programming
being opened and closed in MMC 200 and MMC 800.
20 HOTEL PAGE
FEED
END This option determines where the page feed is inserted
on HM REPT. (Hotel Application Only)
21 HOTEL START
LINE
0 This option determines that the number of empty lines
per each page on HM REPT. (Hotel Application Only)
23 DID NUM/NAME YES If this option is set to YES, received DID information will
print on SMDR.
24 ITP
REGISTRATION
NO If set to YES the SMDR record will show registration of
ITP phones.
25 SET
RELOCATION
NO If set to YES the SMDR record will show Set
Relocations.
26 CALL INDE NO If set to YES the SMDR record will show Call Index.
28 INCOM CALL
RESP
NO This option determines whether incoming ISDN trunk
calls will print on SMDR. Even though the called party
doesn’t answer, the SMDR record (‘IR’) will print.
ENTERING CHARACTERS
Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS DEPEND ON COUNTRY
To Next Page
Loading...
