Samsung OfficeServ 7000 Series - Door Ring Assignment

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-65
[211] DOOR RING ASSIGNMENT
Designates which station or group of stations will ring when a door phone button is pressed.
If the ring plan destinations are not entered the default ring plan 1 is used. Available ring
plans are 1 to 6.
DEFAULT DATA
STATION GROUP: 500
ACTION DISPLAY
1) Press Transfer button and enter 211.
Display shows first door phone:
[229] DOOR RING
1:500 2:500
2) Dial door phone number. (e.g., 230)
OR
[230] DOOR RING
1:500 2:500
Press Volume button to scroll through door phone
numbers and use the Right Soft button to move
cursor.
OR
Select All door ring.
[ALL] DOOR RING
1:500 2:500
3) Enter new ring plan number selection via dial keypad.
[250] DOOR RING
1:301 2:500
OR
Press Volume button to make selection and press
Right Soft button.
4) Press Right Soft button to return to step 2.
OR
Press Left Soft button to return to step 3.
OR
Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 601 ASSIGN STATION GROUP