Samsung OfficeServ 7000 Series - Vms Call Type

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-131
[413] VMS CALL TYPE
Defines the type of Signaling for voice mail assigned trunk.
Type Description Default
AP ANSWERING PHONE NO
AT AUDIO TEX NO
AA AUTO ATTENDANT YES
VM VOICE MAIL NO
CONDITIONS
This program applies to the SVM-800 voice mail system which is no longer supplied or
supported by Samsung.
MMC [413]
This option may not be available in certain OfficeServ models.
DEFAULT DATA
SEE TABLE
ACTION DISPLAY
1)
Press Transfer button and enter 413.
Display shows:
[701] CTYPE AP:N
AT:N AA:Y VM:N
2)
Enter desired trunk number. (e.g., 702)
OR
[702] CTYPE AP:N
AT:N AA:Y VM:N
Press Volume button to make selection and press
Right Soft button to move cursor.
OR Select all trunks.
3)
Enter 1 for YES, or 0 for NO.
OR
[702] CTYPE AP:N
AT:N AA:Y VM:N
Press Volume button to make selection and press
Right Soft button.
4)
Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE