Samsung OfficeServ 7000 Series - Sip User

CHAPTER 2. MMC Programming
2-388
© SAMSUNG Electronics Co., Ltd.
[839] SIP USER
This is the program to register to outbound SIP server on per user bases, using each pair of
username and password.
In-site Information
No Parameter Description Default
00 USERNAME Alphanumeric username when registering to interacting
Outbound SIP Server.
-
01 AUTH UID This is the username which is used if the authentication
is required from the SIP server. This is the item which is
used for registering the individual number.
-
02 AUTH PWD This is the password which is used if the authentication is
required from the SIP server. This is the item which is
used for registering the individual number.
-
03 TEL NO This numbers are used to match alphabetical usernames
to internal CLI and DDI numbers. (Matched to CLI for
outgoing, and DDI for Incoming)
-
Out-site Information
No Parameter Description Default
00 SITE URL When dialed number is matched with TEL NO in this
table, this value should be put into To-Header in outgoing
INVITE message.
-
01 TEL NO This numbers are used to match with dialed number.
When matched, system considers the dialed number as a
medium for converting from/to values to alphabetical
values specified in SITE URL and CLI NAME in this table.
-
02 CLI NAME When dialed number is matched with TEL NO in this
table, this value should be put into From-Header in
outgoing INVITE message.
-
03 ROUTING When dialed number is matched with TEL NO in this
table, this specifies the SIP CARRIER to which outbound
message is transferring.
DEFAULT