Samsung OfficeServ 7000 Series - Assign Networking Options

CHAPTER 2. MMC Programming
2-350
© SAMSUNG Electronics Co., Ltd.
[825] ASSIGN NETWORKING OPTIONS
Assigns the options used for networking.
No Option Description
0 ADD NUMBER TO NAME Assign to include the extension number in the name field of
Q-SIG standard message.
1 USE REMOTE VM Assign to use SVMi on remote system.
2 REMOTE VM NUMBER Assign to access number of remote SVMi when the Remote
VM is used.
3 REMOTE CID NUMB Assign to use delete node number when CID number send to
SVMi.
4 USE REMOTE ATTN Use Attendant on remote system. (RING 1-6, Y/N)
5 REMOTE ATTN NUMB Access number of remote Attendant when the remote
Attendant is used. (RING 1-6)
6 SPNET DIGIT SEND Specify by which method dialed digits are sent across the
network.
DEFAULT DATA
ADD NUMB TO NAME: YES
USE REMOTE VM: NO
REMOTE VM NUMBER: NONE
REMOTE CID NUMB: YES
USE REMOTE ATTN: NO
REMOTE ATTN NUMB: NONE
SPNET DIGIT SEND: MGI SIGNALING
ACTION DISPLAY
1)
Press Transfer button and enter 825.
Display shows:
ADD NUMB TO NAME
YES
2) Dial the option number.
OR
USE REMOTE VM
NO
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial 1 for YES or 0 for NO.
OR
USE REMOTE VM
YES
Press Volume button to select YES/NO and press
Right Soft button to mover cursor.