Samsung OfficeServ 7000 Series - Alarm Reporting

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-411
[851] ALARM REPORTING
This MMC is used to view, store, print or clear system alarms. Two levels of faults are
displayed via an alarm code: major alarms and minor alarms. Major alarms codes are
usually service affecting and require a certified technician to determine the fault. A minor
alarm indicates a fault that may or may not be service affecting and usually does not
seriously degrade the system’s operating capabilities.
The alarm buffer holds up to 100 alarms on a First In-First Out (FIFO) basis. Alarms
provide a date and time stamp based on the system time. If applicable, the hardware cabinet,
port, and/or slot will be displayed. If an ALARM SIO port is programmed (MMC 804),
alarm information can be printed on demand and as it is provided.
ALARM REPORTING OPTIONS (Select one of the options)
No Option Description
0 VIEW ALARMS View alarm buffer.
1 OVERFLOW
CONTROL
Determines buffer control when buffer is full.
0) OVERWRITTEN: When buffer is full, the oldest entry in
buffer is overwritten. (Default.)
1) STOP RECORDING: When buffer is full, stop recording
alarms.
2 CLEAR ALARM BUF Clears alarm buffer.
3 PRINT ALARM BUF Prints contents of alarm buffer to the assigned alarm IO port.
ALARM CODE DEFINITION
See Alarm Code Definitions in MMC 852.
DEFAULT DATA
NONE
ACTION DISPLAY
1)
Press Transfer button and enter 851.
Display shows:
SYS ALARM REPORT
VIEW ALARMS
2) Enter desired option.
OR
SYS ALARM REPORT
VIEW ALARMS
Press Volume button to make selection and press
Right Soft button to move cursor.