CHAPTER 2. MMC Programming
2-424
© SAMSUNG Electronics Co., Ltd.
[855] DISPLAY SYSTEM OPTIONS
This MMC provides a means to view miscellaneous hardware and daughter-boards in the
system without having to dismantle or power down the system to confirm if the hardware is
mounted. This is a READ-ONLY MMC.
MMC [855]
This option may not be available in certain OfficeServ models.
OfficeServ7400 Main System
Option Description
MP40 SW Shows DIP software status of MP40
Cx-LP CONN Shows the status of LP40/LCP card
Cx-LP LOC y Shows location Daughter Board of Cabinet x Slot y
CxSy SW Shows the DIP software status of TEPRI card
Cx-RINGETy Shows the external ringer’s existence (This option is only showed
using supported LP40, supported cabinet)
OfficeServ7200(MCP, MP20) Main System
Option Description
MCP LOC x Shows location Daughter Board of Slot x
MCP SW Shows DIP software status of MCP
LCP ONLINE Shows operation status of LCP
CxSxSW Shows the DIP software status of TEPRI card
ACTION DISPLAY
1) Press Transfer button and enter 855.
Display shows:
SYSTEM OPTIONS
MP40 SW:00000111
2) Press Volume button to view options.
SYSTEM OPTIONS
C1-LP CONN:YES
3) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
To Next Page
Loading...
