Samsung OfficeServ 7000 Series - Station Speed Dial Name

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-13
[106] STATION SPEED DIAL NAME
Allows a name up to 11 characters to be entered for each personal speed dial location.
This allows speed dial numbers to be selected by name when the directory dial feature is
used.
ENTERING CHARACTERS
Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 106.
Display shows:
[201] SPEED NAME
00:
2) Dial station number. (e.g., 205)
OR
[205] SPEED NAME
00:
Press Volume button to select station and press Right
Soft button to move cursor.
If selected station has no speed dial bins, the display
will be as shown and a new station may be selected.
[305] SPEED NAME
SPDBLK NOT EXIST
3) Dial speed dial location. (e.g., 01)
OR
[205] SPEED NAME
01:_
Press Volume button to scroll through location
numbers and press Right Soft button to move cursor.
4) Enter the location name using the procedure described
above and press Right Soft button to
[205] SPEED NAME
01:SAM SMITH
return to step 2.
5) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 105 STATION SPEED DIAL
MMC 606 ASSIGN SPEED BLOCK