Samsung OfficeServ 7000 Series - Preset Forward no Answer

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-101
[320] PRESET FORWARD NO ANSWER
Allows a technician to assign a default destination for Forward No Answer (FNA) to each
station on the system. These destinations may be the same or different for each station.
The preset FNA destination will be temporarily overwritten if the station user enters a
different FNA destination. If you cancel the new destination, the preset destination will
once more be in effect. Preset FNA time follows the station ‘NO ANS FWD’ timer (MMC
502).
Preset FNA can be assigned respectively for each type of call.
No Type Description
0 INT Preset FNA applies only to intercom calls.
1 EXT Preset FNA applies only to incoming calls.
2 BOTH Preset FNA applies to both intercom and incoming calls.
When using PRE FWD BUSY option in MMC [210]
If PRE FWD BUSY option in MMC 210 is set ON, the forward busy follows this
feature.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 320.
Display shows:
[201] PRESET FNA
NONE OPT:BOTH
2) Dial station number. (e.g., 205)
OR
[205] PRESET FNA
NONE OPT:BOTH
Press Volume button to select station and press Right
Soft button to move cursor.
OR
Select all stations.
[ALL] PRESET FNA
NONE OPT:BOTH
3) Dial valid number via keypad.
OR
[205] PRESET FNA
202 OPT:BOTH
Press Volume button to select call type and press
Right Soft button to move cursor.