Samsung OfficeServ 7000 Series - Assign Trunk;Trunk Use

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-157
[428] ASSIGN TRUNK/TRUNK USE
This MMC is used to allow or restrict trunks from making outgoing calls to other trunks
within the same system. By default (DIAL=YES) all trunks can use other trunks.
To prevent use, select NO.
DEFAULT DATA
DIAL: YES
ACTION DISPLAY
1) Press Transfer button and enter 428.
Display shows:
(301) USE (301)
DIAL:YES
2) Dial the trunk use group number. (e.g., 305)
OR
(305) USE (301)
DIAL:YES
Press Volume button to selection and press Right Soft
button.
OR
Select all trunk use groups.
(ALL) USE (301)
DIAL:YES
3) Dial the trunk use group number. (e.g., 304)
OR
(305) USE (304)
DIAL:YES
Press Volume button to selection and press Right Soft
button.
4) Dial 1 for YES or 0 for NO.
OR
(305) USE (304)
DIAL:NO
Press Volume button to select YES/NO and press
Right Soft button to move cursor.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 614 STATION/TRUNK USE GROUP