CHAPTER 2. MMC Programming
2-14
© SAMSUNG Electronics Co., Ltd.
[107] KEY EXTENDER
Use this program to view the programmable buttons assigned to stations. In addition, it
allows the system administrator to assign key extenders to some keys to make a general
access feature key more specific. The feature keys that can have extenders are listed below.
Key Feature Extender
AB Absence Extension number
ACC Account code bin 000-999
BOOK Booking function number 0-49
BOSS Boss and Secretary 1-4
CC Multi-Ring service by extension number
and call pick up button
(CALL COVERAGE) (Extension
number)
CR VM Call Record Mailbox number
CS UCD Call Status UCD group number
DIR Directory dial by name type 1-3
DP Direct Pickup Extension or station group number
DS Direct Station Select Station number
EP Established Call Pick Up (ESTABLISHED CALLPICK UP)
FWRD Call Forward 0-7
GPIK Group Pickup 01-99
IG In/Out of Group Station group number
MGC MCS Predefined Conference 001-999 (MCS Group Number)
MACR Assign MACRO function 0-49
MMPG Meet Me Page 0-9, *
MS Manual Signaling Extension or station group number
MW Message Waiting Extension or station group number
NIGHT Night Group Number 0-9, *
NPG Networking Paging Area Number Networking node number + Paging
area number (0-9, *)
NS Networking Extension Number Networking extension number
PAGE Page 0-9, *
PARK Park Orbits 0-9
PMSG Programmed Station Messaging 01-20
RP Ring Plan 1-6
RSV Room Status View (Hotel Application only) 1-5
SG Station Group Station group number
SP UCD Supervisor UCD group number
SPD Speed Dial Personal: 00-49, System: 500-999
TCLIP Temporary CLIP table number 1-4
To Next Page
Loading...
