Samsung OfficeServ 7000 Series - Trunk Gain

CHAPTER 2. MMC Programming
2-164
© SAMSUNG Electronics Co., Ltd.
[437] 16 TRUNK GAIN
Specifies TX/RX gain to be adjusted in trunk line calls.
CONDITIONS
None
DEFAULT DATA
TRK TYPE: 1
RX: 3 TX: 3
ACTION DISPLAY
1) Press the Transfer button and 437.
[701] TRK TYPE: 1
RX:3 TX:3
2) Enter a trunk phone number.
OR
Select a trunk line by pressing the Volume button and
move the cursor by pressing the Right Soft button.
OR
Specify all trunk lines by pressing the Message
button (DS-24SE) or the ANS/RLS button (DS-
4028E).
[702] TRK TYPE: 1
RX:3 TX:3
3) Enter a TRK TYPE number (1~4) and store the
number by pressing the Right Soft button.
[702] TRK TYPE:2
RX:3 TX:3
4) Enter a RX GAIN number (1~4)
and store the number by pressing the Right Soft
[702] TRK TYPE:2
RX:2 TX:3
button.
5) Enter a TX GAIN number (1~5)
and store the number by pressing the Right Soft
[702] TRK TYPE:2
RX:2 TX:4
button.
6) Press the Transfer button to store the data and
complete the procedure or press the Speaker button to
[702] TRK TYPE:2
RX:2 TX:4
store the data.