CHAPTER 1. Overview of MMC Programming
1-8
© SAMSUNG Electronics Co., Ltd.
1.4.2 Operator Level Programming
A technician can do programming within the range set by the MMC [802] CUSTOMER
ACCESS MMC NUMBER.
Programming is allowed for any phone within the tenant group, but it can be done for only
one phone at a time.
1.4.2.1 System Related MMC
The MMC programs related to the function of the system are as follows:
Table 1.2 System Related MMC list
MMC No. MMC Name
MMC: 200 OPEN CUSTOMER PROGRAMMING
MMC: 201 CHANGE CUSTOMER PASSCODE
MMC: 202 CHANGE FEATURE PASSCODE
MMC: 203 ASSIGN UA DEVICE
MMC: 204 COMMON BELL CONTROL
MMC: 205 ASSIGN LOUD BELL
MMC: 206 BARGE-IN TYPE
MMC: 207 ASSIGN VM/AA PORT
MMC: 208 ASSIGN RING TYPE
MMC: 209 ASSIGN ADD-ON MODULE
MMC: 210 CUSTOMER ON/OFF PER TENANT
MMC: 211 DOOR RING ASSIGNMENT
MMC: 214 DISA ALARM RINGING STATION
MMC: 217 TRAFFIC REPORT OPTION
MMC: 219 RELAY TYPE
MMC: 220 ISDN SERVICE TYPE
MMC: 221 EXTENSION TYPE
MMC: 222 FAX PAIR
MMC: 224 AUDIO PROMPT
MMC: 225 IP-UMS/IVR SERVICE
To Next Page
Loading...
