Samsung OfficeServ 7000 Series - Audio Prompt

CHAPTER 2. MMC Programming
2-74
© SAMSUNG Electronics Co., Ltd.
[224] AUDIO PROMPT
Enables to provide a prompt recorded in an AA or a VMS (Voice Mail System) card when a
user responds to an alarm.
No. Option Description
0 STN GROUP Specifies AA/VMS group number to be connected in alarm
response.
1 PROMPT NO. Specifies the number of a prompt to be provided in alarm
response.
2 GROUP BUSY Specifies the background voice source to be called when all
AAs/VMS groups to be connected are busy in alarm response.
If set as ‘NONE’, dial tone is provided. If set as ‘TONE’, hold tone
is provided.
3 RBT SOURCE Specifies AA/VMS group number to be connected in coloring
service.
4 VCS STN GRP Specifies the number of VCS Station group in MMS service.
(This option may not be available in certain OfficeServ models.)
DEFAULT DATA
None
CONDITIONS
None
ACTION DISPLAY
1)
Press the Transfer button and 224.
AUDIO PROMPT
STN GROUP :NONE
2) Enter the AA/VMS group number specification (0).
AUDIO PROMPT
STN GROUP :NONE
Or, select the AA/VMS group number specification
by using the Volume button and move the cursor by
pressing the Right Soft button.
3) Enter the AA/VMS group number.
AUDIO PROMPT
STN GROUP :548
Or, select the AA/VMS group number by using the
Volume button and move the cursor by pressing the
Right Soft button.