Samsung OfficeServ 7000 Series - Page 113

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-75
4) Enter the AA/VMS prompt number specification
([1]). Or, select the AA/VMS prompt number
AUDIO PROMPT
PROMPT NO.:NONE
specification by using the Volume button and move
the cursor by pressing the Right Soft button.
5) Enter an AA/VMS massage number (01~64).
Or, select the AA/VMS message number by using the
WAKE-UP ANNOUNCE
GROUP BUSY:NONE
Volume button and move the cursor by pressing the
Right Soft button.
6) Enter the GROUP BUSY specification ([2]).
Or, select the GROUP BUSY by using the
WAKE-UP ANNOUNCE
GROUP BUSY:372
Volume button and move the cursor by pressing the
Right Soft button.
7) Enter the number of a background sound source.
Or, select the number of a desired background sound
WAKE-UP ANNOUNCE
RBT SOURCE:NONE
source specification by pressing the Volume button
and move the cursor by pressing the Right Soft
button. If you specify NONE, press the Hold button.
8) Press the Transfer button to store the data and
complete the procedure or press the Speaker button to
store the data.
RELATED ITEMS
Program 601 Assign an extension group.