OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-421
[853] MAINTENANCE BUSY
This MMC is used to place stations, trunks and common resources equipment in a
maintenance busy condition. This can be used to isolate suspected intermittent problems.
Stations placed in maintenance busy will behave like a station in DND when called.
The calling stations display will show ‘MADE BUSY’. Stations receiving DID or E&M
type calls will receive a DND/ No more calls tone. The station display will still function
with station and date.
When the busy station is accessed, it will function like a ‘locked all’ station. Trunks made
busy cannot originate calls. Ring down type trunks will still ring the programmed
destination. Common resource equipment such as DSPs, CID DSPs and miscellaneous
equipment such as page ports and voice mail card ports can also be placed in a maintenance
busy state.
MAINTENANCE BUSY OPTIONS
No Option Description
0 TRK Trunks
1 STN Stations
2 PAGE Page Ports
4 DTMFR DTMF Receiver
5 CID CID Receiver
6 R2MFC R2MFC Receiver
(This option may not be available in certain OfficeServ models.)
7 CONF GRP #01-24
8 MGI MGI Ports
9 MOBEX MOBEX Ports
DTMFR/CID/R2MFC DSP
If DTMFR, CID or R2MFC is selected when DSP is not mounted, display will
show NONE. If mounted, display will show IDLE by default.
DEFAULT DATA
ALL IDLE
To Next Page
Loading...
