Samsung OfficeServ 7000 Series - Assign Station Cos

CHAPTER 2. MMC Programming
2-80
© SAMSUNG Electronics Co., Ltd.
[301] ASSIGN STATION COS
Used to assign a Class Of Service (COS) to each phone. There are 30 different classes of
service (defined in MMC 701, Assign COS Contents) and six ring plans based on the Ring
Plan Time in MMC 507 that can apply to the COS. Classes of service are numbered 01-30.
The default is COS 01.
DEFAULT DATA
RING PLANS 1-6: 01
ACTION DISPLAY
1) Press Transfer button and enter 301.
Display shows first station:
[201] STN COS
1:01 2:01 3:01
2) Dial station number. (e.g., 205)
OR
[205] STN COS
1:01 2:01 3:01
Use Volume button to scroll through stations.
Press Right Soft button to advance step 3.
OR
Use Volume button to scroll through stations and press
Left Soft button to advance to step 4.
OR
Select all stations.
[ALL] STN COS
1:01 2:01 3:01
3) Enter new ring plan selection via dial keypad.
OR
[205] STN COS
1:01 2:01 3:01
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Enter ring plan class of service. (e.g., 05)
OR
[205] STN COS
1:05 2:01 3:01
Use Volume button to scroll through classes of service
and press Right Soft button to advance to the next ring
plan.
OR
Use Volume button to scroll through classes of service
and press Left Soft button to return to step 2.