Samsung OfficeServ 7000 Series - Executive State

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-43
[125] EXECUTIVE STATE
Allows the system administrator or technician to set an executive station’s options, as
follows.
No Option Description
0 EXEC STATE When working with EASYSET, the state of the executive station can be
displayed. (e.g., IN A MEETING)
1 STATE (IN) If EXEC STATE set to OTHERS (IN), EASYSET displays this message.
2 STATE (OUT) If EXEC STATE set to OTHERS (OUT), EASYSET displays this message.
3 ANSWER
MODE
Set answer mode for executive/secretary calling: Ring, Auto Answer,
Voice Announce. (Refer to MMC 103 for a description of answer modes.)
ENTER CHARACTERS
Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.
DEFAULT DATA
NONE
ACTION DISPLAY
1)
Press Transfer button and enter 125.
Display shows:
[201] EXEC STATE
IN THE ROOM
2) Dial executive station number. (e.g., 205)
OR
[205] EXEC STATE
IN THE ROOM
Press Volume button to select station and press Right Soft
button to move cursor.
3) Dial 0~3 to select option. (see the table above).
OR
[205] EXEC STATE
IN THE ROOM
Press Volume button to make selection and press Right Soft
button.
4) Dial 0~9 to select state. (e.g., IN A MEETING)
OR
[205] EXEC STATE
IN A MEETING
Press Volume button to make selection and press Right Soft
button.
5) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next MMC.