Samsung OfficeServ 7000 Series - Phone Ring Tone

CHAPTER 2. MMC Programming
2-24
© SAMSUNG Electronics Co., Ltd.
[111] PHONE RING TONE
Allows the system administrator or technician to select the ring tone heard at each phone.
Eight ring tones are available. A short tone burst of the selection will be heard when the
dial keypad is pressed.
DEFAULT DATA
FREQUENCY: 5
ACTION DISPLAY
1) Press Transfer button and enter 111.
Display shows:
[201] RING TONE
SELECTION 5
2) Dial phone number. (e.g., 205)
OR
[205] RING TONE
SELECTION 5
Press Volume button to select station and press Right
Soft button to move cursor.
OR
Select all stations.
[ALL] RING TONE
SELECTION ?
3) Dial 1~8 to select ring tone.
OR
[205] RING TONE
SELECTION 5
Press Volume button to select ring tone and press
Right Soft button to move cursor.
4)
Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 114 PHONE VOLUME
MMC 318 DISTINCTIVE RINGING