OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-159
[433] COST RATE
In this MMC, the TRUNK COST RATE flags are entered for each trunk. DIAL PLANs are
defined in MMC 746 (Costing Dial Plan). RATE CALCULATION TABLES are defined in
MMC 749. Each trunk may be defined with up to eight cost rates. Enter one or more of the
eight COST RATES per trunk. If an entry is left blank, no call costing will be calculated for
that particular DIAL PLAN.
Call type 8 is fixed for incoming calls. Select cost rate type 8 only if you want incoming
call costing for a trunk.
DEFAULT DATA
ALL TRUNKS/ALL DIAL PLANS: ALL COST RATES ASSIGNED
ACTION DISPLAY
1) Press Transfer button and enter 433.
Display shows trunk number and Cost Rate table
numbers:
[701] :12345678
CR :11111111
2) Dial trunk number. (e.g., 705)
OR
Press Volume button to select trunk and press Right Soft
button to move cursor.
OR
Select all.
[705] :12345678
CR :11111111
3) Press Volume button to move cursor along the line until
the cursor is under the Cost Rate number. (e.g., 2)
Enter 1 for YES or 0 for NO and press Right Soft
button to return to step 1.
OR
[701] :12345678
CR :10111111
4) Press Transfer button to save and exit.
RELATED ITEMS
MMC 746 COSTING DIAL PLAN
MMC 747 RATE CALCULATION TABLE
To Next Page
Loading...
