Samsung OfficeServ 7000 Series - Sli Ring Cadence

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-185
[510] SLI RING CADENCE
Provides the ability to customize the ring cadence for single line ports on a system-wide
basis. There are five cadences available.
When changing the MMC [510]
MMC [510] should not be changed from the default levels without the assistance
of the local SAMSUNG distributor.
No Item Description
1 STN RING This is the cadence intercom calls will ring at.
2 TRK RING This is the cadence trunk calls will ring at.
3 DOOR RING This is the cadence door phone calls will ring at.
4 ALM RING This is the cadence alarm reminder calls will ring at.
5 CBK RING This is the cadence callbacks will ring at.
DEFAULT DATA
(unit: milliseconds)
Item ON OFF ON OFF
STN RING 1000 3000 1000 3000
TRK RING 0400 0200 0400 3000
DOOR RING 0400 0100 0400 2000
ALM RING 0200 0200 0200 2000
CBK RING 0200 0200 0200 4000
ACTION DISPLAY
1)
Press Transfer button and enter 510.
Display shows:
1:STN RING:0400
0200 0400 3000
2) Dial cadence number from above list. (e.g., 3)
OR
3:DOOR RING:0400
0100 0400 2000
Press Volume button to select
Press Left Soft button and advance to step 3.
3) Dial new value for interrupt times.
(must be four digits)
3:DOOR RING:0100
9900 0100 9900
Press Right Soft button to advance cursor.
Press Left Soft button to retreat cursor.
If valid entry, system returns to step 2.