CHAPTER 2. MMC Programming
2-430
© SAMSUNG Electronics Co., Ltd.
[860] LICENSE
This MMC is used for setting all types of licenses. Please note that license scheme has been
changed from v4.30. In earlier versions, OfficeServ had a single license scheme: all service
licenses were contained in a single license key. However, in v4.30 each different service
has each different license key as following.
No. Parameter Description
0 PBX LICENSE (OLD) This is for backwards compatible with earlier version than
V4.30. If having license in previous version, the license
should be inserted in this parameter.
1 PBX LICENSE STS This is for backwards compatible with earlier version than
V4.30 .If inserted license is valid, license details are shown.
2 PBX LICENSE STACK This is for backwards compatible with earlier version than
V4.30. Designate the SIP Stack within the number allowed
3 SIP LICENSE Insert license for sip stack.
4 SIP LICENSE STS If inserted license is valid, license details are shown.
Display assigned information of sip stack for SIP Trunk, SIP
Station including 3
rd
party, SIP application (e.g. IP-UMS/IVR)
5 SERVICE LICENSE Insert license for H323, Soft phone, MOBEX, IP Phone,
WIFI Phone, Call Manager.
6 SERVICE LIC STS If inserted license is valid, license details are shown.
7 RESOURCE Insert the license for MGI, VMS. (This option may not be
available in certain OfficeServ models.)
8 RESOURCE LIC STS If inserted license is valid, license details are shown.
9 TEMP LICENSE This can have 3 values.
- DISABLE
- URGENT ENABLE: If a license key with an old MAC
address is entered, even if the MAC addresses differ, the
old license shall be able to be used for two weeks.
If a normal license is entered while an urgent license is
being operated, it shall be disabled automatically.
The urgent license shall be used just one time on the same
H/W.
- TUTORIAL ENABLE: A license function for tutorial shall be
added.
It shall be operated only when there is no normal license
key. But if normal license is inserted, tutorial license is
changed to disable and the normal license is used
automatically.
After being enabled, it can be used for 2 weeks.
When the tutorial license is enabled, the available
resources shall be available as follows.
To Next Page
Loading...
