Samsung OfficeServ 7000 Series - Trunk Cos

CHAPTER 2. MMC Programming
2-150
© SAMSUNG Electronics Co., Ltd.
[422] TRUNK COS
Used to assign a class of service to each trunk for each of the six ring plans available.
There are 30 different COS that are defined in MMC 701, Assign COS Contents. Classes of
service are numbered 01-30. Trunk COS applies on Tandem connections.
DEFAULT DATA
ALL RING PLANS: COS 01
ACTION DISPLAY
1)
Press Transfer button and enter 422.
Display shows first trunk:
[701] TRK COS
1:01 2:01 3:01
2)
Dial trunk number. (e.g., 705)
OR
[705] TRK COS
1:01 2:01 3:01
Use Volume button to scroll through trunks.
Press Right Soft button to advance to step 3.
OR
Use Volume button to scroll through trunks and press
Left Soft button to advance to step 4.
OR
Select all trunks.
[ALL] TRK COS
1:01 2:01 3:01
3)
Enter ring plan class of service. (e.g., 05)
OR
[705] TRK COS
1:05 2:01 3:01
Use Volume button to scroll through classes of
service and press Right Soft button to advance to
step 4.
OR
Use Volume button to scroll through classes of
service and press Left Soft button to return to step 2.
4)
Enter the next ring plan class of service. (e.g., 05)
OR
[705] TRK COS
1:05 2:05 03:01
Use Volume button to scroll through classes of
service and press Right Soft button to return to step
2.
OR
Use Volume button to scroll through classes of
service and press Left Soft button to return to the
previous step.