Samsung OfficeServ 7000 Series - Mobex Info

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-109
[328] MOBEX INFO
The system shall have virtual stations to serve the MOBEX function. This virtual station is
called a MOBEX station. A MOBEX station shall be mapped to a MOBEX phone in a one-
to-one relationship.
The trunks that can make a call to a MOBEX phone shall be limited to PRI/BRI and SIP
trunks. (In case of SIP trunk, MOBEX EXECUTIVE function is not allowed.)
 MOBEX Number: The phone number of an external device, such as a mobile phone,
to be ringing.
 MOBEX Phone: An external phone that has a MOBEX number.
 MOBEX User: A user of a MOBEX phone.
 MOBEX Station: A virtual station to which a MOBEX number is assigned.
 Master Station: A station that assigns a group of MOBEX stations to which a
simultaneous call is to be made.
No. Type Description
0 TEL NUMBER The phone number of an external device, such as a mobile phone,
to be ringing
The length of value should be above 2 digit and be formatted with
speed dial.
The available trunk is ISDN/SIP trunk/trunk group/LCR number.
1 CLI NUMBER The CLI of external MOBEX phone
It is possible to input 0~9 number and maximum 16 letters
2 EXEC USER Choose to use exclusive option or not
(YES

FREE (Free resource): 0 LIC (License): 0 )
3 MASTER STN A station that assigns a group of MOBEX stations to which a
simultaneous call is to be made.
4 DEACTIVATE Set MOBEX station to be active or not
MMC [328]
MOBEX extension number should be assigned in MMC 724 before MMC 328
setting.