Samsung OfficeServ 7000 Series - Uk Lcr Option

CHAPTER 2. MMC Programming
2-246
© SAMSUNG Electronics Co., Ltd.
[716] UK LCR OPTION
This MMC provides UK LCR options.
No Option Description
0 NETWORK CODE This table is used to network access code when the call is routed to
the secondary network. This table contains up to 16 entries. Each
code has 4 digits maximum in length and use option for None, CCC, PIN
or Both. (Default: all codes are empty and all use options are none)
0 NONE: This code doesn’t use.
1 CCC: This code uses with Call Cast Code (CCC).
2 PIN: This code uses with PIN Code.
3 BOTH: This code uses with PIN code and Call Cast Code.
1 PIN CODE This table is used to PIN code when the call is routed to the secondary
network. This table contains up to 4 entries and each code has 10
digits maximum in length. (Default: all tables are empty)
2 CCC OPTION This is used to which number used for Call Cost Code.
(Default: Station Number)
0 STATION NUMBER: Station number uses for Call Cost Code.
1 NONE: Do not use Call Cost Code.
3 STATION PIN NO. This is assigned to PIN code table number for each station number.
(Default: all stations are 1)
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 716.
Display shows:
NETWORK CODE
01: USE:NONE
2) Enter option number 0-3.
OR
NETWORK CODE
01: USE:NONE
Press Volume buttons to select number and press
Right Soft button to move cursor.
3) Enter number 0-16.
OR
NETWORK CODE
02:_ USE:NONE
Press Volume buttons to select number and press
Right Soft button to move cursor.
4) Enter network access code via dial keypad.
NETWORK CODE
02:1234 USE:NONE