OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-217
[616] MGI USER
This program selects which specific MGI ports will be dedicated on a per-port basis for IP
station/trunk devices. If this MMC is not used, allocation of MGI ports will be controlled
by MMC 615. By defining dedicated MGI port usage, the IP station/trunk selected will
always use the port programmed. MGI ports can be assigned for digital stations
(2XX~2XXX), private and public ITP stations (32XX), VoIP Networking trunks (83XX),
H.323 trunks (84XX), SIP trunks (85XX) and MGI3 facsimile. Only one assignment per
MGI port is permitted. Any entries made here will override entries made in MMC 615.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 616.
Display shows the first available option:
[3801] MGI USER
NONE
2) Enter MGI dial number.
OR
[3801] MGI USER
NONE
Press Volume button to select an MGI port and press
Right Soft button to move cursor.
3) Enter MGI user dial number.
OR
[3801] MGI USER
NONE
Press Volume button to select an MGI user and press
Right Soft button to store and move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
To Next Page
Loading...
