Samsung OfficeServ 7000 Series - Assign Loud Bell

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-55
[205] ASSIGN LOUD BELL
Designates the station that controls the loud bell ring output of a MIS card. (Each MIS card
provides one loud bell port.) The loud bell will follow the ring cadence of the designated
station.
CONDITIONS
Only a station can be assigned to control the loud bell, not a station group.
DEFAULT DATA
UNASSIGNED
ACTION DISPLAY
1) Press Transfer button and enter 205.
Display shows current setting.
[3901]LOUD BELL
RING PAIR:NONE
2) Dial loud bell number. (e.g., 3902)
OR
[3902]LOUD BELL
RING PAIR:NONE
Use Volume button to scroll through loud bell
numbers and press Right Soft button to move the
cursor.
3) Enter station number. (e.g., 201)
OR
[3902]LOUD BELL
RING PAIR:201
Press Volume button to make selection and press
Right Soft button to return to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
NONE