Samsung OfficeServ 7000 Series - Assign Network Trunk

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-343
[821] ASSIGN NETWORK TRUNK
Assigns the Q-Signaling PRI trunk for networking and let the Q-Signaling PRI trunk be
linked with other PBX systems. It is assigned data on a per-TEPRI card basis.
Option Description
NORMAL TRUNK Assigns the normal PRI turnk.
QSIG TRUNK Assigns the Q-Signaling PRI trunk for networking between OfficeServ
Systems
QSIG BASIC 1 Assigns the Q-Signaling PRI trunk for networking between OfficeServ
System and the other system. It supports only basic functions
QSIG BASIC 2 Assigns the Q-Signaling PRI trunk for networking between OfficeServ
System and the other system. It can support caller name.
DEFAULT DATA
NORMAL
ACTION DISPLAY
1)
Press Transfer button and enter 821.
Display shows:
[701] Q-SIG TRK
NORMAL TRUNK
2) Enter first trunk number of PRI card.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
[701] Q-SIG TRK
NORMAL TRUNK
3) Enter 0 for NORMAL TRUNK, or 1 for QSIG
TRUNK
or 2 for QSIG BASIG 1 or 3 for QSIG BASIC 2.
OR
Press Volume button to make selection and press
Right Soft button to save and move cursor.
[701] Q-SIG TRK
QSIG TRUNK
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE