Samsung OfficeServ 7000 Series - Trunk Toll Class

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-117
[403] TRUNK TOLL CLASS
Assigns to ll class level assignments on a per-trunk or all-trunk basis in a day or night
condition. The options for toll level will follow either the station class or the class of
service defined in MMCs 702, Toll Deny Table, and 703, Toll Allowance Table.
The toll classes available are listed below with their entry numbers.
No Class Description
0 F-STN Follow station toll restriction
1 CLS-A Follow toll class A (Unrestricted)
2 CLS-B Follow toll class B
3 CLS-C Follow toll class C
4 CLS-D Follow toll class D
5 CLS-E Follow toll class E
6 CLS-F Follow toll class F
7 CLS-G Follow toll class G
8 CLS-H Follow toll class H (All restricted)
DEFAULT DATA
ALL TRUNKS: F-STN
ACTION DISPLAY
1) Press Transfer button and enter 403.
Display shows:
[701] TOLL CLASS
1:F-STN 2:F-STN
2) Dial trunk number. (e.g., 704)
OR
[704] TOLL CLASS
1:F-STN 2:F-STN
Use Volume button to scroll through trunk numbers and
press Right Soft button to move the cursor.
OR
Select all.
[ALL] TOLL CLASS
1:F-STN 2:F_STN
3) Dial ring plan number. (1~6)
OR
[704] TOLL CLASS
1:F-STN 2:F-STN
Use Volume button to scroll through ring plan numbers
and press Right Soft button to move the cursor.
4) Enter day toll class. (e.g., 2 for CLS-B)
OR
[704] TOLL CLASS
1:CLS-B 2:F-STN
Press Volume button to scroll through toll classes and use
Right Soft button to move the cursor.