Samsung OfficeServ 7000 Series - E1;Pri Crc4 Option

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-137
[417] E1/PRI CRC4 OPTION
This option is used to enable/disable CRC4 generation and checking.
CONDITIONS
 This is useful with some networks which do not support CRC4 framing but only
PCM30 framing.
 After changing this option, MMC 418 must be used to restart the card to make the
change effective.
DEFAULT DATA
CRC4: ON
ACTION DISPLAY
1) Press Transfer button and enter 417.
Display shows:
[701] E1/PRI CRC
ON
2) Enter first trunk number in PRI card. (e.g., 701)
OR
[701] E1/PRI CRC
ON
Press Volume button to select trunk and use Right Soft
button to move cursor.
3) Enter 1 for ON 0 for OFF.
OR
[701] E1/PRI CRC
OFF
Press Volume button to select and press Right Soft
button.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
MMC 418 BRI AND PRI CARD RESTART