Samsung OfficeServ 7000 Series - Page 174

CHAPTER 2. MMC Programming
2-136
© SAMSUNG Electronics Co., Ltd.
ACTION DISPLAY
1) Press Transfer button and enter 416.
Display shows:
[701] EM/DD RING
FOLLOW INCOM DGT
2) Enter desired trunk number. (e.g., 705)
OR
[705] EM/DD RING
FOLLOW INCOM DGT
Press Volume button to make selection and press
Right Soft button to move cursor.
OR
Select all trunks.
[ALL] EM/DD RING
FOLLOW INCOM DGT
3) Dial option number. (0~2)
OR.
[705] EM/DD RING
NO. RCV DIGIT:00
Press Volume button to make selection and press
Right Soft button to return step 2.
If FOLLOW TRK RING is selected, the LCD display
shows step 4.
4) Enter the number of incoming digits.
[705] EM/DD RING
NO. RCV DIGIT:00
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 714 DID NUMBER AND NAME TRANSLATION