Samsung OfficeServ 7000 Series - Networking Function; Voip Function; Table 1.10 Networking Function Programming List; Table 1.11 Voip Function Programming List

CHAPTER 1. Overview of MMC Programming
1-18
© SAMSUNG Electronics Co., Ltd.
1.5.2 Networking Function
The MMC programs related to the function of networking are as follows:
Table 1.10 Networking Function Programming list
MMC Program No. Program Description
MMC: 820 ASSIGN SYSTEM LINK ID
MMC: 821 ASSIGN NETWORK TRUNK
MMC: 823 ASSIGN NETWORK COS
MMC: 824 NETWORK DIAL TRANSLATION
MMC: 825 ASSIGN NETWORKING OPTIONS
MMC: 830 LAN PARAMETERS
MMC: 861 SYSTEM OPTIONS
1.5.3 VoIP Function
The MMC programs related to the function of VoI P (Voice over Internet Protocol) are as
follows:
Table 1.11 VoIP Function Programming list
MMC Program No. Program Description
MMC: 831 MGI PARAMETERS
MMC: 832 VoIP ACCESS CODE
MMC: 833 VoIP IP TABLE
MMC: 834 H.323 OPTIONS
MMC: 835 MGI DSP OPTIONS
MMC: 836 H.323 GK OPTIONS
MMC: 837 SIP OPTIONS
MMC: 838 PRIVATE IP ADDRESSES
MMC: 839 SIP USER
MMC: 843 MPS OPTIONS
MMC: 861 SYSTEM OPTIONS