Samsung OfficeServ 7000 Series - Assign Forced Code

CHAPTER 2. MMC Programming
2-88
© SAMSUNG Electronics Co., Ltd.
[305] ASSIGN FORCED CODE
This MMC allows one of the four options to be selected: the assignment of account codes
with verification, account codes without verification and authorization codes (or none of
these) on a per-station basis or on an all-station basis. The system supports 500
authorization codes and 999 account codes which may or may not require verification.
No Type Description
0 NONE No Account or Authorization code required. (strictly voluntary)
1 AUTHORIZE CODE Forces user to enter a valid Authorization code of four or
more digits listed in the AUTHORIZATION CODE Table.
(MMC 707)
2 ACCT VERIFIED Forces user to enter a valid Account code listed in the
ACCOUNT CODE Table. (MMC 708)
3 ACCT NO VERIFIED Forces user to enter an Account code which is not verified.
User can enter any code up to 12 digits. (including
∗
and #)
DEFAULT DATA
NONE
ACTION DISPLAY
1)
Press Transfer button and enter 305.
Display shows.
[201] FORCD CODE
NONE
2)
Dial station number. (e.g., 205)
OR
[205] FORCD CODE
NONE
Press Volume button to select station and press Right
Soft button to move cursor.
3)
Dial a feature option 0-3. (e.g., 2)
OR
[205] FORCD CODE
ACCT VERIFIED
Press Volume button to select option and press Right
Soft button to return to step 2.
4)
Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 707 AUTHORIZATION CODE
MMC 708 ACCOUNT CODE