Samsung OfficeServ 7000 Series - Station Status

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-17
[108] STATION STATUS
This is a READ-ONLY MMC. Displays the following attributes of a station port.
No Status Description
0 PORT NO Cabinet (1-3)/Slot (1-9)/Port (1-16)
1 TYPE Phone Type
2 PICKUP GROUP None, 01-99
3 SGR Station Group Number
4 BOSS-SECR None, 1-4
5 PAGE None, Page Zone (0-4, * )
6 COS 1, COS 2 Service level of ring mode 1 and 2
7 COS 3, COS 4 Service level of ring mode 3 and 4
8 COS 5, COS 6 Service level of ring mode 5 and 6
9 TENANT GROUP Tenant Group Number (1 or 2)
DEFAULT DATA
PORT #: FOLLOWS HARDWARE POSITION
TYPE: DEPENDENT ON CONNECTED PHONE
PICKUP GRP: NONE
SGR: NONE
BOSS-SECR: NONE
PAGE ZONE: NONE
COS NUMBER: 01 IN ALL RING PLANS
TENANT GRP: 1
ACTION DISPLAY
1)
Press Transfer button and enter 108.
Display shows first station:
[201] STN STATUS
PORT:C1-S3-P01
2) Dial station number. (e.g., 205)
OR
[205] STN STATUS
PORT:C1-S3-P05
Press Volume button to select station and press Right
Soft button to move cursor.
3) Dial 0~9 to select station status type.
OR
[205] STN STATUS
PICKUP GROUP:01
Press Volume button to select status and press Right
Soft button to return to step 2.