Samsung OfficeServ 7000 Series - Assign Ring Type

CHAPTER 2. MMC Programming
2-58
© SAMSUNG Electronics Co., Ltd.
[208] ASSIGN RING TYPE
Allows programming of single lines to have ICM ringing, Trunk Line ringing and data
secure. With the many types of external ringing devices, all configurations can be met.
All devices will also have a positive disconnect signal. Do not make VM/AA ports data;
this will return them to a single line port and stop voice mail integration.
No Type Description
0 ICM RING Follows normal SLI ring cadence.
1 CO RING Follows Trunk line ring cadence.
2 DATA RING Follows Trunk line ring cadence and does not support off-hook ring.
DEFAULT DATA
ICM RING
ACTION DISPLAY
1)
Press Transfer button and enter 208.
Display shows:
[209] RING TYPE
ICM RING
2) Dial station number. (e.g., 205)
OR
[205] RING TYPE
ICM RING
Press Volume button to select station and press Right
Soft button to move cursor.
3) Dial 1, 2 or 0 to select port type. (e.g., 2)
OR
[205] RING TYPE
DATA RING
Press Volume button to select type and press Left or
Right Soft button to return to step 2 above.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next
MMC.
RELATED ITEMS
NONE