CHAPTER 2. MMC Programming
2-34
© SAMSUNG Electronics Co., Ltd.
[118] CONFERENCE GROUP
Allows the system administrator or technician to set conference groups for any station.
A station is allowed up to five conference groups, and each group can include 4 members
(excluding the station itself). Names can be allocated to groups.
Conference members can be other stations, station groups, and external telephone numbers
(which must include the outgoing access code).
CONDITIONS
Only stations set to use conference groups in MMC 612 can be selected here. Large LCD
phones are automatically set to use conference groups.
ENTERING CONFERENCE GROUP NAME
Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 118.
Display shows:
[201] GRP (1)NAME
2) Dial station number. (e.g., 205)
OR
[205] GRP (1)NAME
Press Volume button to select station and press Right
Soft button to move cursor.
3) Dial 1~5 to select group.
OR
[205] GRP (1)NAME
Press Volume button to select group and press Right
Soft button to move cursor.
4) Dial 0 to select name or dial 1~4 to select member.
OR
[205] GRP (1)MBR1
NONE
Press Volume button to select name or member and
press Right Soft button to move cursor.
OR
Press Left Soft button to return to step 3.
To Next Page
Loading...
