Samsung OfficeServ 7000 Series - Page 460

CHAPTER 2. MMC Programming
2-422
© SAMSUNG Electronics Co., Ltd.
ACTION DISPLAY
1) Press Transfer button and enter 853.
Display shows busy functions:
MAINTENANCE BUSY
TRK :NONE 
2) Enter busy function type (0-8) via dial keypad.
OR
MAINTENANCE BUSY
STN :NONE 
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter station number.
OR
MAINTENANCE BUSY
STN :201  IDLE
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Press 1 to make busy or 0 to make idle.
OR
MAINTENANCE BUSY
STN :201  BUSY
Press Volume button to make selection and press
Right Soft button to save and return step 3.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 851 ALARM REPORTING
MMC 852 SYSTEM ALARM ASSIGNMENTS