CHAPTER 2. MMC Programming
2-22
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Feature Default Description
15 AUTO ANS CO OFF When ON, keyset will automatically answer outside calls
through the speakerphone. For this to work, the keyset
must be set to Auto Answer mode in MMC 103. Calls to
groups cannot be auto-answered.
16 ENBLOCK 2LCD OFF Enables en-block dialing for 2-Line LCD phones.
This option only works when 2 LINE ENBLOCK option is
enabled in MMC 861.
17 STN NO RING OFF When ON, no tones will be heard when phone rings.
18 FEATURE TONE OFF When the extension is set as ‘ON’ and a subscriber sets the
extension function, a tone (message tone) different from
dial tone will be heard. The relevant functions are DND, All
Forward, Busy Forward, No Answer Forward, Follow Me
and Station Lock functions.
19 RCV GPU INFO OFF When ON, the extensions will receive the information of
PING RING. This function can operate in case PING RING
SERVICE is enabled in MMC861.
20 MISSED CALL OFF When ON, the information of the missed calls will be
displayed on extensions. The missed call means that the
ringing call is not answered. The information of the missed
calls includes the below
- The call which was not answered.
- In case the call which was occurred by group call was
not answered.
- In case the call by group call was overflowed to the other
extension.
- The call which was forwarded because of setting NO
ANSWER FORWARD
- The call which was picked up by other extensions
In case of Call Waiting, it is not included.
21 NO DISP TRK# OFF This feature selects whether the trunk number is displayed
or not for the duration of the call. When ON, incoming or
outgoing number without trunk number will be displayed.
If there is no incoming/outgoing number to be displayed,
only trunk number will be shown.
22 USE STN RING OFF When ON, the IP phone will be use self ring melody,
otherwise the IP phone will be use system ring melody.
DEFAULT DATA
SEE DESCRIPTION
SOME OPTIONS DEPEND ON COUNTRY
To Next Page
Loading...
