Samsung OfficeServ 7000 Series - Page 137

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-99
ACTION DISPLAY
1) Press the Transfer button and 318.
[201] DIST.RING
DGP TONE:NONE
2) Press an extension number or a trunk line number.
(e.g., 202)
[202] DIST.RING
DGP TONE:NONE
Or, select the extension or trunk by pressing the
Volume button and move the cursor by pressing the
Right Soft button.
3) Enter a ring tone ([0]-[8]).
(Press [0] to enter NO).
[202] DIST.RING
DGP TONE:NONE
Or, select the ring tone by pressing the Volume button
and press the Right Soft button.
4) Enter a ring cadence ([0]-[5]).
(Press [0] to enter NO).
[202] DIST.RING
SLT RING:NONE
Or, press the Volume button to select the ring cadence
and press the Right Soft button.
5) Enter a priority ([0]-[9]).
(Press [0] to enter NO).
[202] DIST.RING
PRIORITY:NO
Or, press the Volume button to select the ring cadence
and press the Right Soft button.
6) Press the Transfer button to store the data and
complete the procedure or press the Speaker button to
store the data.
RELATED ITEMS
Program 111 Specify Ring Tone