Samsung OfficeServ 7000 Series - Page 204

CHAPTER 2. MMC Programming
2-166
© SAMSUNG Electronics Co., Ltd.
ACTION DISPLAY
1) Press Transfer button and enter 500.
Display shows:
ALARM REM.CNTER
05 
2) Enter number from above list. (e.g., 6)
OR
UCDS AUDIO ALARM
00 
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter in new value via dial keypad.
If entry is valid, system will return to step 2.
UCDS AUDIO ALARM
00  02
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE