CHAPTER 2. MMC Programming
2-172
© SAMSUNG Electronics Co., Ltd.
(Continued)
Timer Name Default Range Unit Description
VM RBK DELAY TM 0 0-250 SEC In case of an incoming call, the answer time
for VM ringback tone is delayed
VOIP RE-ROUTE TM 15 0-25 SEC If an outgoing call made via a VoIP trunk
does not receive an acknowledgement
message from the called party within this
time, the call is treated as failed.
When timers value is ‘0’
Some timers are disabled when their value is set to ‘0’.
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS DEPEND ON COUNTRY
ACTION DISPLAY
1)
Press Transfer button and enter 501.
Display shows first timer value:
AA INT DGT TIME
05 SEC
2)
Press Volume button to select timer and press Right
Soft button to move cursor.
KMMC LOCK OUT TM
060 SEC
3) Enter new value using keypad; if valid, system
returns to step 2 with new value.
KMMC LOCK OUT TM
060 SEC
250
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
NONE
To Next Page
Loading...
