Samsung OfficeServ 7000 Series - Page 282

CHAPTER 2. MMC Programming
2-244
© SAMSUNG Electronics Co., Ltd.
7) Enter call wait option via dial keypad.
(1 for YES, 0 for NO)
DID DIGIT (005)
CW:N MC:99 DC:0
OR
Press Volume button to make selection and press
Right Soft button to advance to next step.
8) Enter maximum call count via dial keypad. (00-99)
OR
DID DIGIT (005)
CW:N MC:99 DC:0
Press Volume button to make selection and press
Right Soft button to advance to next step.
9) Enter number or delete digit via dial keypad. (0-16)
OR
DID DIGIT (005)
CW:N MC:99 DC:0
Press Volume button to make selection and
press Right Soft button to advance to next step.
10) Enter the name via dial keypad and press Right
Soft button to return to Step 1.
DID DIGIT (005)
NAME:
11) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
TRUNK PROGRAMMING
Refer to RELATED ITEMS in MMC 411, ASSIGN E1 SIGNAL TYPE.