Samsung OfficeServ 7000 Series - Page 295

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-257
(Continued)
Feature Description
VMMSG VOICE MAIL MESSAGE KEY (Requires SVMi card)
VMSCMT VMS COMMENT (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMSMSG VMS MESSAGE (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMSOUT VMS OUT CALL (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMSREC VMS RECORD (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VMSVAC VMS VACANT (Requires SVM)
(This option may not be available in certain OfficeServ models.)
VT VOICEMAIL TRANSFER
WAKEUP WAKE UP (Hotel Feature)
XCHIN EXPRESS CHECK IN (Hotel Feature)
DEFAULT DATA
For phones, buttons 1 and 2 are set as CALL buttons by default. (Other settings depend on
the keyset type.) For AOMs, all buttons are set as DSS buttons by default.
ACTION DISPLAY
1) Press Transfer button and enter 722.
Display shows:
[201] KEY (MAST)
01:CALL1 
2) Enter selected station number. (e.g., 205)
OR
[205] KEY (MAST)
01:CALL1 
Press Volume button to select station and press Right
Soft button to move cursor.
3) Enter selected key number. (e.g., 18)
OR
[201] KEY (MAST)
18:NONE  _
Press Volume button to select key number and press
Right Soft button to move cursor.
4) Using table above, press dial keypad to select
number.
[201] KEY PROG.
18:NONE (GPIK_
OR
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to enter
extender, if required, or to return to step 2.