Samsung OfficeServ 7000 Series - Page 298

CHAPTER 2. MMC Programming
2-260
© SAMSUNG Electronics Co., Ltd.
DEFAULT DATA
SEE DEFAULT DATA IN MMC 722
ACTION DISPLAY
1) Press Transfer button and enter 723.
Display shows:
TYPE:24 BTN SETS
01:CALL1 
2) Enter type of set via dial keypad. (e.g.,1)
OR
TYPE:12 BTN SETS
01:CALL1 
Press Volume button to make selection and press
Right Soft button.
3) Enter key number. (e.g., 03)
OR
TYPE:12 BTN SETS
03:NONE 
Press Volume button to make selection and press
Right Soft button.
4) Using table above, press dial keypad to select number.
OR
TYPE:12 BTN SETS
03:NONE  GPIK
Press Volume button to make selection and press
Right Soft button to advance cursor to step 5 to enter
extender, if required.
OR
Press Left Soft button to return to step 3.
5) Enter extender if required. (e.g., 03)
OR
TYPE:12 BTN SETS
03:GPIK (GPIK03
Press Volume button to make selection and press
Right Soft button to return to step 2.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 107 KEY EXTENDER
MMC 720 COPY KEY PROGRAMMING
MMC 721 SAVE STATION KEY PROGRAMMING