Samsung OfficeServ 7000 Series - Page 303

OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-265
(Continued)
Feature Default Description
VMADM NONE VOICE MAIL ADMINISTRATION (Requires SVMi card)
VMAME NONE ANSWER MACHINE EMULATION (Requires SVMi card)
VMMEMO NONE VOICE MAIL MEMO (Requires SVMi card)
VMMSG NONE VOICE MAIL MESSAGE KEY (Requires SVMi card)
VMSCMT NONE VMS COMMENT (Requires SVM -800)
(This option may not be available in certain OfficeServ
models.)
VMSMSG NONE VMS MESSAGE (Requires SVM -800)
(This option may not be available in certain OfficeServ
models.)
VMSOUT NONE VMS OUT CALL (Requires SVM -800)
(This option may not be available in certain OfficeServ
models.)
VMSREC NONE VMS RECORD (Requires SVM -800)
(This option may not be available in certain OfficeServ
models.)
VMSVAC NONE VMS VACANT (Requires SVM -800)
(This option may not be available in certain OfficeServ
models.)
WAKEUP 18 WAKE UP (Hotel Feature)
WCOS 59 WORKING CLASS OF SERVICE
DEFAULT DATA
SEE DESCRIPTION
FEATURE CODES DEPEND ON COUNTRY
ACTION DISPLAY
1)
Press Transfer button and enter 724.
Display shows:
STN NUMB.:C1-S1
DLI-05:201 
2) Dial option number to make selection. (e.g., 06)
OR
FEATURE NUMBER
ABAND:64  _
Press Volume button to make selection and press
Right Soft button to advance cursor.
3) Dial first letter of feature name. (e.g., 7)
OR
FEATURE NUMBER
PAGE:55  _
Press Volume button to make selection then press
Right Soft button to advance cursor.
FEATURE NUMBER
PARK:NONE  _