OfficeServ 7000 Series Call Server Programming Manual
© SAMSUNG Electronics Co., Ltd.
2-273
EXAMPLES OF VM/AA OPERATION (IN-BAND DTMF DIGIT STRING)
In the following example, all call and type data is turned on unless otherwise stated.
X is the separator digit, all-default values are used in these examples and [ ] is not used.
A DIL 701 calls a VM/AA port or group:
[1] + [701] + [ ] + [ ]
In the above example, if Trunk Line information is not used:
[ ] + [ ] + [ ] + [ ] (Nothing is used)
DIL 701 calls a call-forwarded station (205):
[2] + [205] + [X] + [701]
In the above example, if forward information is not used:
[ ] + [205] + [X] + [701]
In the above example, if forward and DN2/Trunk Line information is not used:
[ ] + [205] + [ ] + [ ]
DIL 701 calls group 501 that overflows to VM/AA:
[4] + [501] + [x] + [701]
In the above example, if overflow information is turned off:
[ ] + [ ] + [ ] + [ ] (Nothing is sent)
A DID call rings the VM/AA directly:
[B] + [9999] + [ ] + [ ]
9999 are the DID digits from Trunk Line
In the above example, if did information is turned off:
[ ] + [9999] + [ ] + [ ]
A station transfers (blind or screened) a call (Trunk Line, DID or intercom) to VM/AA
group or port. When the transferring station hangs up (blind transfer):
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A station (202) transfers a Trunk Line call (702) to a station (225) that is Call Forward All
to a VM/AA group or port. When the transferring station hangs up (blind transfer) and the
VM/AA group or port answers:
[2] + [225] + [x] + [702]
To Next Page
Loading...
