CHAPTER 2. MMC Programming
2-284
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Option Description
07 INVLID MSG Determines what message will play if the caller dials invalid digits
repeatedly until the retry counter expires. Invalid digits are digits not
contained in the translation table for this plan. The invalid message will
repeat for the value contained in the retry counter.
08 NO ANS MSG
Determines what message will play if the caller is recalled to the AA port
because of a no answer.
09 XFER MSG Determines what message will play if the caller is transferred.
10 BUSY MSG Determines what message will play if the caller selects a busy station.
11 NO STN MSG Determines what message will play if the caller dials an invalid
extension (not installed). This retry message will repeat for the value
contained in the retry counter. See Retry Count.
12 NO ACT MSG Determines what message will play if the caller does not act.
13 CAMP ON Determines if calls will be transferred to busy stations. Calls transferred
to busy stations will be camped-on. The default value is OFF.
14 ANS DELAY Sets how many rings will occur before this plan answers a call. The
default value is 01 second.
15 RETRY CNT Determines how many selection errors a caller may make before being
transferred to the invalid digits destination. In case of no action, will not
follow this option.
16 TRANS TABLE Determines what translation table this plan will use. (see MMC 732 AA
TRANSLATION TABLE) The default value is same number of plan
number.
17 BUSY DEST Determines the destination for the call if the selected destination is
busy. This can be another station, station group or plan. Plans are
entered by pressing A button plus two digits 01-12.
18 NO ANS DEST Determines the destination for the call if the selected destination does
not answer. This can be another station, station group or plan. Plans
are entered by pressing A button plus two digits 01-12.
19 NO ACT DEST Determines the destination for the call if the caller makes no response
(this is also the destination for rotary dial callers).
This can be another station, station group or plan. Plans are entered by
pressing A button plus two digits 01-12.
20 INVLID DEST Determines the destination for the call if the caller dials invalid digits
after the retry counter has expired. This destination can be another
station, station group or plan. Plans are entered by pressing A button
plus two digits 01-12.
MMC [733]
This option may not be available in certain OfficeServ models.
To Next Page
Loading...
